HONG KONG SAUL ELECTRICAL LIMITED.

Manager: Jinny

E-mail: sales7@saulplc.com

E-mail: sales5@xrjdcs.com

Tel: + 86-15359273791 （WhatsApp）

Wechat: + 86-15359273791

Address: Room 609, Strait Modern City, No.510 Xin’ao Road, Xindian Town, Xiang’an District, Xiamen

Part Number:IS420ESWBH3A ETHERNET SWITCH

16-PORT IONET SWITCH
10/100 BASE
COPPER ONLY
-30 TO +65C
Mark VIeS IONet Switch IS420ESWBH3A is produced by General Electric operating on 24/28 VDC, this model does not have any fiber ports but has 16 copper ports. The IS420ESWBH3A switch requires a mounting clip if being DIN-rail mounted and only needs screws if being panel mounted.

Dimensions:H 18.8 cm x W 8.6 cm x D 5.6 cm
Input Voltage:24/28 VDC
Mounting Method:DIN-Rail or Potential Panel Mounting
Operating Temperature:-40 to 70°C

Industrial Ethernet Switch IS420ESWBH3A is part of the Mark VIe Safety Control System designed by General Electric. This switch does not have any fiber ports but has sixteen copper ports, the copper ports are 10/100Base-TX RJ45 ports. The primary operation of the switch is to perform as a level one Ethernet switch which will center on the capability to buffer multicast and broadcast packets. There should be enough space to allow for the buffer of one packet per port; if multiple incoming streams are being sent to the switch, it can only accept one incoming stream out of the multiple streams and will buffer the remaining streams for later transmission.

There are LED indicators on the IS420ESWBH3A switch. There is a power LED and the remaining LEDs are activity and link functions. When the link LED is solid yellow it indicates that a 10 MB link is being used and when solid green a 100 MB link is being used, and no LED light indicates that there is no link. The colors for the activity LED are also green and yellow but they will flash, when the LED flashes green it indicates that the activity is at full duplex and when flashing yellow the activity is at half duplex.

The IS420ESWBH3A switch can be mounted in a variety of ways, the switch can be DIN-rail mounted in a parallel or perpendicular application and also has the possibility to be panel mounted if needed. Please note that when the switch is DIN-rail mounted there are different clips needed which are the 259B2451BVP1 and 259B2451BVP4 clips.

◈Fast worldwide delivery

◈More than 551,867 unique products available

◈Guaranteed best prices on the market

◈Functionally tested products

◈More than 5.000 brands available

◈Every item is dealt with high care and fully operational

◈100% quality assurance

◈If you can’t find the parts you need, don’t hesitate to contact us

◈Our goal is to ensure that you have an enjoyable shopping experience with us

In stock for sale